MINITOR V Pager Features:
Fixed Alert
If
you utilize the beep mode, it can be fixed so the alert tone is always
loud, regardless of where the volume control is set; or it can be variable,
adjusted with the volume control. When there is a danger that the volume
control could be turned down by clothing rubbing against it, the fixed loud
alert option may be desirable to avoid missing a page. (This option has no impact on mode positions
with vibrating only alert)
Voice Memo
Voice
Memo is a feature that enables an audible mode
function announcement. With the Voice Memo function enabled, each time the
pager’s mode switch is turned, an audible synthesized voice describes the
operation on that mode. (Operation on
pager mode positions a, b, c & d)
Reset Function
The
Reset Function can be set to either “Quiet” or “Monitor.” If set to “Quiet,” the pager will
automatically reset back to the quiet “closed mode” once a page is received;
only your department’s pages are heard.
If the Reset Function is set to “Monitor,” the pager will remain in the
“open” mode after a page is received; you will hear other pages sent out by
your county’s dispatch center (such as neighboring departments) until the reset
button is pushed.
Call Reminder
Call
Reminder is a feature that can be enabled to continuously emit an audible tone
every few minutes reminding the user of message that has not been played.
Alert Types
The
Minitor V has three different modes of alerting the user of a page, beeping
only, vibrating only, and a combination of beeping and vibrating.
The four switch positions can each have one of these modes assign to it.
Push to Listen
Push
to listen is a feature that is useful in a meeting situation or if you are at a
location where you want the pager to notify you, but not interrupt the people
around you. If a position on the pager is programmed for push to listen, when a
page is received, the pager will vibrate but the dispatcher’s voice will not
play over the speaker. When the user is
ready to hear the dispatcher’s voice message, the user simply pressed the voice
playback button on the pager.
Pager/Monitor Mode
Minitor
V pagers can be programmed for a selective call “Pager” mode, or for a
“Monitor” modes. In the selective call “Pager” mode the pager
will not make any sound until your specific department page has been received. In the “Monitor” mode you will hear
(monitor) all radio traffic on your county’s paging channel, such as your
neighboring departments.
Codes
The
Minitor V pager can be programmed with multiple department codes, such as fire
and ambulance codes. We have some users
that have pagers alert for both a fire and ambulance page. Some departments
have an extra page assigned to officers. Some departments like to be notified
of specific alarms. For example, we have
a department that has a system setup to automatically page if the sprinkler
system in the fire hall is activated. If
there are questions or requests for these multiple page code options, please
contact us. Different sounding alert
tones available for these additional page codes, making it easier to identify
what page is being received.
Pager Alert Tones:
**click
on the play button for each alert tone below to hear a audio recording
standard
continuous
alternative
1
alternative
2
alternative
3
alternative
4
alternative
5
alternative
6
alternative
7
alternative
8